VEGA VEGABAR 64 Profibus PA - Manual (Page 6)

2.5 Safety approval markings and safety tips
The safety approval markings and safety tips on the device must be
observed.
2.6 CE conformity
This device fulfills the legal requirements of the applicable EC
guidelines. By attaching the CE mark, VEGA provides a confirmation
of successful testing. You can find the CE conformity declaration in the
download area of www.vega.com.
2.7 Fulfillment of NAMUR recommendations
With respect to compatibility, the NAMUR recommendation NE 53 is
fulfilled. This applies also to the corresponding indicating and
adjustment components. VEGA instruments are generally upward and
downward compatible.
l Sensor software for DTM VEGABAR 64 HART, PA or FF
l DTM VEGABAR 64 for adjustment software PACTware
l Indicating and adjustment module for sensor software
The parameter adjustment of the basic sensor functions is independ-
ent of the software version. The range of available functions depends
on the respective software version of the individual components.
The software version of VEGABAR 64 can be determined as follows:
l via PACTware
l on the type label of the electronics
l via the indicating and adjustment module
You can view all software histories on our website www.vega.com.
Make use of this advantage and get registered for update information
via e-mail.
2.8 Safety instructions for Ex areas
Please note the Ex-specific safety information for installation and
operation in Ex areas. These safety instructions are part of the
operating instructions manual and come with the Ex-approved
instruments.
2.9 Environmental instructions
Protection of the environment is one of our most important duties. That
is why we have introduced an environment management system with
the goal of continuously improving company environmental protection.
The environment management system is certified according to DIN
EN ISO
14001.
Please help us fulfil this obligation by observing the environmental
instructions in this manual:
6 VEGABAR 64 • Profibus PA
2 For your safety
28252
-EN
-081209