VEGA VEGABAR 64 Profibus PA - Manual (Page 59)

Connection cable
-
Configuration four wires, one suspension cable, one breather
capillary, screen braiding, metal foil, mantle
-
Wire cross-section 0.5 mm² (AWG 20)
-
Wire resistance < 0.036 Ω/m (0.011 Ω/ft)
-
Tensile strength > 1200 N (270 pounds force)
-
Standard length 5 m (16.4 ft)
-
Max. length 1000 m (3281 ft)
-
Min. bending radius at 25 °C/77 °F 25 mm (0.985 in)
-
Diameter approx. 8 mm (0.315 in)
-
Colour - standard PE Black
-
Colour - standard PUR Blue
-
Colour - Ex-version Blue
Electromechanical data - version IP 68
Cable entry/plug 16)
-
External housing l
1 x cable gland M20 x 1.5 (cable: ø 5 … 9 mm),
1 x blind stopper M20 x 1.5
or:
l
1 x plug (depending on the version), 1 x blind
stopper M20 x 1.5
Spring-loaded terminals for wire cross-sec-
tion up to 2.5 mm² (AWG 14)
Connection cable between IP 68 instrument and external housing:
-
Configuration four wires, one suspension cable, one breather
capillary, screen braiding, metal foil, mantle
-
Wire cross-section 0.5 mm² (AWG 20)
-
Wire resistance < 0.036 Ω/m (0.011 Ω/ft)
-
Standard length 5 m (16.40 ft)
-
Max. length 180 m (590.5 ft)
-
Min. bending radius at 25 °C/77 °F 25 mm (0.985 in)
-
Diameter approx. 8 mm (0.315 in)
-
Colour - standard PE Black
-
Colour - standard PUR Blue
-
Colour - Ex-version Blue
Indicating and adjustment module
Voltage supply and data transmission through the sensor
Indication LC display in dot matrix
16) Depending on the version M12 x 1, according to DIN 43650, Harting, 7/
8" FF.
VEGABAR 64 • Profibus PA 59
10 Supplement
28252
-
EN
-081209