VEGA VEGAPULS 45 4 … 20 mA; HART compact sensor - Manual (Page 58)

58 VEGAPULS 42, 44 and 45 – 4 … 20 mA
7.2 Approvals
When radar sensors are used in Ex areas or
on ships, the instruments must be suitable
and approved for the explosion zones and
applications.
The suitability is checked by the approval
authorities and is certified in approval docu-
ments.
Please note the attached approval docu-
ments when using a sensor in Ex area.
Test and approval authorities
VEGAPULS radar sensors are tested and
approved by the following monitoring, test
and approval authorities:
- PTB
(Physikalisch Technische Bundesanstalt -
Physical Technical Approval Authority)
- FM
(Factory Mutual Research)
- ABS
(American Bureau of Shipping)
- LRS
(Lloyds Register of Shipping)
- G L
(German Lloyd)
- CSA
(Canadian Standards Association)
Technical data
Intrinsically safe in Ex environment
Series 40 sensors in EEx ia (intrinsically safe)
version require for use in Ex areas special
separators or safety barriers. The separators
or safety barriers provide intrinsically safe
(ia) circuits. Below, a selection of instruments
with which series 40 sensors work reliably.
Separator and signal conditioning instru-
ment:
- VEGADIS 371 Ex
- A puissance 3 PROFSI 37-24070A
- VEGAMET 614 Ex
- Apparatebau Hundsbach
AH MS 271-B41EEC 010
Separator, safety barrier:
- Stahl 9001/01/280/110/10
- Stahl 9001/51/280/110/14
- MTL 787 S+
- CEAG CS 3/420-106
Separator:
- VEGATRENN 149 Ex…
- Stahl 9303/15/22/11
- CEAG GHG 124 3111 C1206
Pressure-tight encapsulated in Ex area
Series 40 sensors in EEx d ia (pressure-tight
encapsulated) version can be used in Ex
areas without special safety barriers due to
their pressure-tight encapsulated terminal
compartment (provided the appropriate
installation regulations are observed).
SIL conformity and IEC 61508 /
IEC 61511
VEGAPULS radar sensors meet the require-
ments on functional safety acc. to IEC 61508 /
IEC 61511. For further information see Sup-
plement under „Safety Manual“.