VEGA VEGAPULS 56K - Manual (Page 8)

8 VEGAPULS 56K
22915-EN-041227
HART ® handheld
HART ® handheld on the 4 … 20 mA signal cable
Adjustment with the HART ® handheld
VEGAPULS series 50 sensors with
4 … 20 mA output signal can also be ad-
justed with the HART
® handheld. A special
DDD (Data Device Description) is not neces-
sary - the sensors can be adjusted with the
HART
® standard menus of the handheld.
To make adjustments, simply connect the
HART ® handheld to the 4 … 20 mA output
signal cable or insert the two communication
cables of the HART
® handheld into the ad-
justment jacks on the sensor.
2
2
4 ... 20 mA
HART Communicator
Product description
Adjustment with the adjustment module
MINICOM
With the small (3.2 cm x 6.7 cm) 6-key ad-
justment module with display, the adjustment
can be carried out in clear text dialogue. The
adjustment module can be plugged into the
radar sensor or into the optional, external
indicating instrument.
Unauthorised sensor adjustments can be
prevented by removing the adjustment mod-
ule.
Detachable adjustment module MINICOM
Adjustment with detachable adjustment module on the
radar sensor or on the external indicating instrument
VEGADIS 50
- + ESC
OK
2
4
Tank 1
m (d)
12.345
- + ESC
OK
Tank 1
m (d)
12.345
4 ... 20 mA
- +
ESC
OK
Tank 1
m (d)
12.345