VEGA VEGAPULS 56K - Manual (Page 7)

VEGAPULS 56K 7
22915-EN-041227
2
2
Adjustment with the PC on the 4 … 20 mA signal and
supply cable to the PLC or directly on the sensor
The adjustment and parameter data can be
saved with the adjustment software on the
PC and can be protected by passwords. On
request, the adjustments can be quickly
transferred to other sensors.
Product description
Adjustment with the PC on the 4 … 20 mA signal and
supply cable to the PLC or directly on the sensor
1.3 Adjustment
Every measurement set-up is unique. For
that reason, every radar sensor needs some
basic information on the application and the
environment, e.g. which level means "empty“
and which level "full“. Beside this "empty and
full adjustment“, many other settings and
adjustments are possible with VEGAPULS
radar sensors.
The adjustment and parameter setting of
radar sensors is carried out with
- the PC
- the detachable adjustment module MINI-
COM
- the HART ® handheld
Adjustment with the PC
The set-up and adjustment of the radar sen-
sors is generally done on the PC with the
adjustment software PACT
ware TM . The pro-
gram leads quickly through the adjustment
and parameter setting by means of pictures,
graphics and process visualisations.
The PC can be connected at any measuring
site in the system or directly to the signal
cable. It is connected by means of the two-
wire PC interface converter VEGACONNECT 3
to the sensor or the signal cable.
2
2
4 ... 20 mA
+ -
PLC