VEGA VEGAPULS 56K - Manual (Page 47)

VEGAPULS 56K 47
22915-EN-041227
PN 16
PN 25
PN 40
PN 64
bar
40
25
16
-40 0 50 100 150 200 250 300 350 ˚C
64
bar
40
25
16
-40 0 50 100 150 200 250 300 350 ˚C
PN 16
PN 25
PN 40
Flange DIN DN 50
Material: 1.4571
Groove and tongue acc.
to DIN 2512 Form F, N
Flange DIN DN 80
Material: 1.4571
Seal surface acc. to DIN
2526 Form B, C, D, E
bar
40
25
16
-40 0 50 100 150 200 250 300 350 ˚C
PN 16
PN 25
PN 40
Flange DIN DN 50
Material: 1.4571
Seal surface acc. to DIN
2526 Form B, C, D, E
Ambient conditions
Ambient temperature on the housing -20°C … +60°C
Flange temperature (process temp.) -40°C … +350°C (pressure-dependent), see
following diagrams
Vessel installation with process temperatures > 200°C the rear of
the flange must be covered with a heat insulation
see chapter „4 Mounting and installation“
Storage and transport temperature -40°C … +80°C
Protection IP 66/IP 67
Protection class
- two-wire sensor
II
- four-wire sensor I
Overvoltage category III
Vessel pressure max. 64 bar (temperature-dependent), see
following diagrams
Technical data