VEGA VEGAPULS 56K - Manual (Page 34)

34 VEGAPULS 56K
22915-EN-041227
5 Set-up
5.1 Adjustment media
Radar sensors can be adjusted with the
- PC (adjustment software PACT
ware TM )
- detachable adjustment module
MINICOM
- HART ® handheld.
The adjustment must be carried out with only
one adjustment device. If, for example, you
attempt to adjust the parameters with the
MINICOM and the HART
® handheld at the
same time, the adjustment will not work.
PC
With the adjustment program PACT ware TM on
the PC, you can adjust the radar sensors
quickly and conveniently. The PC communi-
cates via the interface adapter
VEGACONNECT 3 with the sensor. During
the process, a digital adjustment signal is
superimposed on the signal and supply
cable. The adjustment can be carried out
directly on the sensor or at any desired loca-
tion along the signal cable.
Adjustment module MINICOM
With the adjustment module MINICOM, you
adjust directly in the sensor or in the external
indicating instrument VEGADIS 50. With a
dialogue text display and 6 keys, the module
offers the same adjustment functionality as
the adjustment software VVO.
HART ® handheld
VEGAPULS series 50K radar sensors, like
other HART
® protocol compatible instruments,
can be adjusted with the HART ® handheld. A
manufacturer-specific DDD (Data-Device-
Description) is not required. The radar sen-
sors are adjusted with the HART
® standard
menus. All main functions are therefore ac-
cessible.
Functions that are rarely used, such as, for
example, scaling of the A/D converter for
signal output or adjustment with medium, are
not possible, i.e. disabled, with the HART
®
handheld. These functions must be carried
out with the PC or the MINICOM.
5.2 Adjustment with PC
When using a sensor in conjunction with a
VEGA signal conditioning instrument, use a
communication resistor according to the
following schedule:
VEGA signal conditioning instr. Rx
VEGAMET 513, 514, 515, 602 50 … 100 Ohm
VEGAMET 614 no additional
VEGADIS 371 resistor
necessary
VEGAMET 601 200 … 250 Ohm
VEGASEL 643 150 … 200 Ohm
VEGAMET 513 S4, 514 S4
515 S4, VEGALOG EA card
100 … 150 Ohm
Set-up