VEGA VEGABAR 41 HART User Manual

Page 27

VEGABAR 41 (HART

)

Setup

In the window "Adjustment“ you click to

Zero/

Span

Then, in the window "Zero/Span adjustment“
you must choose the adjustment mode. If you
want to carry out the “adjustment without
taking the actual product into account” (dry
adjustment), click to

, then to

Here you can choose in which unit the adjust-
ment should be carried out (mbar, psi, kPa).
Then you enter in the appropriate fields the
pressure values corresponding to 0 % and
100 %. Then click to

. The adjustment is

now carried out.

Click to

Zero

or to

Span

to carry out the

appropriate adjustment.

Note:

For the zero adjustment, the vessel or the
pressure lines must be unpressurised! For
the span adjustment you have to generate a
defined pressure (e.g. 80 %) in the vessel or
in the pressure lines.

If you want to carry out the "Adjustment with
medium“ (live adjustment), click in this win-
dow to

yes

, then to

In the window "Zero adjustment“ you choose
in which unit the adjustment should be car-
ried out (mbar, psi, kPa). Click to

Save

. The

zero adjustment is then carried out.