VEGA VEGASWING 83 fail safe and signal conditioning instrument VEGATOR 526 Ex - Manual (Page 16)

16 VEGASWING 81 W5 Ex.C, 83 W5 Ex.C fail safe
Mounting
The multipoint connection is available as
follows:
- Wire-Wrap standard connection
1,0 x 1,0 mm
- Plug connection 2,8 x 0,8 mm
- Termi-Point standard connection
1,6␣ x␣ 0,8␣ mm
- Soldering connection
- Screw terminals 2 x 0,5 mm
2
For further information concerning mounting,
see the operating instruction of the carrier.
Coding
The multiple plug of the instrument is provided
with a coding hole to avoid interchanging of
the various instruments.
Due to a fixed coded pin on the Ex-module, it
is ensured that only Ex-instruments can be
inserted.
Signal conditioning instrument
VEGATOR 526 Ex
VEGATOR can be either mounted with a
module into a carrier BGT 596␣ Ex or into a
single housing type 589-10␣ EX.
Module-Ex (Ex 32)
for VEGATOR 526 Ex
Multipoint connector DIN 41 612, series F, 32-
pole (d, z) with coded pins, Ex-separating
chamber and mounting material for mounting
in carrier BGT 596 Ex.
Mounting carrier
Mount the appropriate module (Ex-version) to
your carrier BGT 596␣ Ex. Wire the connection
of the multipoint connector according to the
wiring plans on the following pages.
Mounting not
suitable for
adhesive
products
Fig. 2.7
Installation examples
Transparent cover
The front plate of VEGATOR 526 Ex can be
provided with a lockable transparent cover to
avoid unauthorized adjustment. The cover is
attached to the instrument.
2
4
6
8
12
20
28
24
22
10
14
16
18
30
32
26
Coding of the multipoint connector
(top view)
Coded pin here
Fig. 2.8