VEGA VEGAFLEX 54P (Profibus PA) - Manual (Page 5)

VEGAFLEX 54P (Profibus PA) 5
- +
ESC
OK
Tank 1
m (d)
12.345
Pluggable adjustment module MINICOM
Product description
Adjustment with PC
The setup and adjustment of VEGAFLEX
sensors is generally done on the PC with the
adjustment program VVO (VEGA Visual
Operating) under Windows
® . The program
leads quickly through adjustment and pa-
rameter setting by means of pictures, graph-
ics and process visualisations.
VEGA’s adjustment program VVO can ac-
cess the adjustment options of VEGA sen-
sors in their entirety and, if necessary, can
update the complete sensor software. To do
this, the adjustment program must be in-
stalled on a PC which is equipped with a
Profibus Master Class 2 interface card
(Softing) (see illustration under "1.4 Profibus
output signal“).
The PC with the Profibus interface card can
be connected directly to any position of the
DP bus by using the standard RS 485
Profibus cable.
The adjustment and parameter data can be
saved with the adjustment software on the
PC and can be protected by passwords. On
request, the adjustments can be quickly
transferred to other sensors.
1.3 Types and versions
VEGAFLEX series 50 P
In general, all VEGAFLEX series 50 P sen-
sors can be adjusted with the pluggable
adjustment module MINICOM. With the soft-
ware VEGA Visual Operating (VVO), it is also
possible to adjust the sensor with a PC.
Profibus PA
Two-wire sensors with digital data transmis-
sion acc. to Profibus standard.
Adjustment with adjustment module
MINICOM
With the small (3.2 cm x 6.7 cm) 6-key ad-
justment module MINICOM, the adjustment
can be carried out in clear text dialogue.
The adjustment module can be plugged into
VEGAFLEX or the external indicating instru-
ment VEGADIS 50.
Thus, VEGAFLEX can also be adjusted from
the external indicating instrument VEGADIS
50.
Adjustment with the PC and the standard cable
RS 232 on the VEGALOG processing system
2
1 ... 15
…
…
VEGALOG
571 CPU
VEGALOG
571 EA
CPU
1 … 32