beautypg.com

Warrior 59000 SERIES BRUSH GUARD (Universal) User Manual

Universal brush guard

background image

Protecting Your Adventure Lifestyle

========================================================================================

QUALITY • INTEGRITY • INNOVATION • SERVICE

Warrior, Inc.
16850 SW Upper Boones Ferry Rd
Ste. A
Durham, OR 97224
Phone: (888) 220-6861
Fax: (503) 692-0364

[email protected]
www.warriorproducts.com

UNIVERSAL BRUSH GUARD

INSTALLATION INSTRUCTIONS

WAR 59000 SERIES

READ ALL INSTRUCTIONS BEFORE PROCEEDING.

1. Position your Warrior Universal Brush Guard on the top flat surface of your

bumper. Take care to center it with mounting brackets adjusted forward or
back to accommodate your particular bumper design.

2. Mark through the mounting brackets for drilling.

3. Remove the Universal Brush Guard and drill 3/8” holes where indicated by

marks. Be sure to use safety glasses.

4. Reposition the Universal Brush Guard over the mounting holes and install

using the 3/8” bolts, washers, and lock nuts provided. Make sure all bolts are

tight.

5. After a test drive, re-check tightness of all bolts and you’re done!

Enjoy your new Universal Brush Guard by Warrior Products!