Warrior 2350 LICENSE PLATE FAIRLEAD MOUNTS (Universal) User Manual
License plate fairlead mount, War 2350
Protecting Your Adventure Lifestyle
========================================================================================
QUALITY • INTEGRITY • INNOVATION • SERVICE
Warrior, Inc.
16850 SW Upper Boones Ferry Rd
Ste. A
Durham, OR 97224
Phone: (888) 220-6861
Fax: (503) 692-0364
[email protected]
www.warriorproducts.com
LICENSE PLATE FAIRLEAD MOUNT
INSTALLATION INSTRUCTIONS
WAR 2350
1. Begin by unpacking your kit. You should find a mount plate, two clip mechanisms, and an
assortment of bolts and nuts.
2. Use the supplied four bolts and nuts to install the clip mechanisms to the mount plate. These
clips mount on the back side of the plate, opposite the threaded studs.
3. With the clip mechanisms bolted up and tight, slide your license plate over the 4 threaded studs.
4. Affix a flat washer, external lock washer, and then an acorn nut to each stud.
5. Your mount is now full assembled and can now be installed and uninstalled from your roller
fairlead by simply pressing it into place.
For more information on Warrior Products Jeep Parts and Accessories, please visit us on the web at
www.warriorproducts.com
. If you need further assistance installing your product, please contact us by
email at
or call us at (888) 220-6861.
THANK YOU FOR PURCHASING WARRIOR PRODUCTS