Warrior CATALOG 2013 SPECIALTY VEHICLE - Manual (Page 3)

reAr corNerS
SidePlATeS
BAcKPlATeS
eNTry gUArdS
TAilgATe coVerS
Rear corners provide structural support to the corner area
and enhance the appearance of the vehicle as well. For the
FJ40 there are two versions of the rear corner available: a
normal corner that wraps around the side about a third of
the way into the wheel well, and a full side version that
wraps the entire side up to the door jamb area. For the FJ
Cruiser, corners are available for fitment with OEM fender
flares and fitment with Warrior’s Steel Tube Fender Flares.
Sideplates protect the rocker panel area below the door and
enhance the appearance of the vehicle. Sideplates are sold
in pairs. There are two versions of the Landcruiser sideplate
available: a short version that spans from the rear wheel well
to the large body lip and to the front of the door jamb; a full-
length version extends to the front fender. Modifications may
be necessary to fit the full Sideplate.
Backplates cover the body beneath the tailgate, between the rear
corners. Backplates are cut out to fit around hinges for ease of tailgate
operation.
Tailgate Covers conceal the entire surface area of the tailgate and have
cutouts around the door handle for ease of tailgate opening and operation.
Entry Guards protect the paint and finish of door jambs under the door
seals when closed. The treadbrite, also available in powder-coated black,
provides an excellent non-skid surface for safety. Sold in pairs.
Body Armor
Model Year Description
Finish/Part Number
Diamond
Plate
Black
Diamond Plate
Polished
Aluminum
Smooth Black
Steel
Rear Corners
Toyota FJ40 Landcruiser
60 - 84 Rear Corners (No Cutouts) 914 914PC 914PA S914
Toyota FJ40 Landcruiser 60 - 84 Full Side Rear Corners 914-1 914-1PC 914-1PA S914-1
Suzuki Samurai 86 - 95 Rear Corners - Hard Top 929 929PC - -
Suzuki Samurai 86 - 95 Rear Corners - Soft Top 930 930PC - -
Toyota FJ Cruiser 07 - 13 Rear Corners for OEM Flares 3915 3915PC - S3915
Toyota FJ Cruiser 07 - 13 Rear Corners for Warrior Flares 3920 3920PC - S3920
Sideplates
Toyota FJ40 Landcruiser
60 - 84 Short Sideplates 914A 914APC 914APA S914A
Toyota FJ40 Landcruiser 60 - 84 Full Sideplates 914E 914EPC 914EPA S914E
Toyota FJ Cruiser 07 - 13 Sideplates 3900 3900PC - S3900
Suzuki Samurai 86 - 95 Short Sideplates 931 931PC 931PA S931
Backplates
Toyota FJ40 Landcruiser
60 - 84 Backplates 914C 914CPC 914CPA S914C
Suzuki Samurai 86 - 95 Backplates 932 932PC 932PA S932
Tailgate Panels & Covers
Toyota FJ40 Landcruiser
75 - 84 Tailgate Panel 914F 914FPC 914FPA S914F
Suzuki Samurai 86 - 95 Tailgate Cover 933 933PC 933PA S933
Entry Guards
Suzuki Samurai
83 & Up Entry Guards 901X 901XPC - -
NOTE: All Polished Aluminum (PA Series part #s) are considered a special order. This means that they are not an inventoried part number and will be subject to an estimated 4 week
waiting period. Special orders cannot be cancelled or returned. Special order items will still carry the standard Warrior Products warranty.
Body Armor
diamond Plate – Constructed of #3003 aluminum treadbrite and highly polished to
a bright luster, these accessories have the look of chrome, yet perform better under
adverse conditions. (Chrome may flake and peel, and plastic may break.)
Black diamond Plate – Available for all aluminum parts, the powder-coat finish
is electro-statically painted to provide scratch and corrosion resistance plus lasting
protection from the elements.
Polished Aluminum – Constructed of #5052 aluminum and polished to a bright
luster, these accessories have similar performance characteristics to our diamond plate
product, but without the treadbrite texture.
Smooth Black Steel - Available for most parts made of aluminum, the added strength
and durability of steel is a good alternative. Products constructed of 12-gauge HRPO steel
are black powder-coated to prevent rust and corrosion.
Brushed Aluminum – Constructed of #5052 aluminum, these accessories have
similar performance characteristics to our diamond plate and polished product, but
with a brushed exterior finish. This finish is only available for a limited number of
products.
hammertone gray - MIG-welded, jig-built spring shackles and greaseable leaf
spring shackle kits come in a hammertone gray finish.
gold Zinc - MIG-welded, jig-built spring shackles and greaseable leaf spring shackle
kits come in a gold zinc finish.
Warrior Products offers the broadest selection of base materials and surface finishes in its line of Body Armor Exterior
Protection accessories available on the market today. Including our signature aluminum diamond plate material, we
offer the following five finishes:
UNIVERSAL - What does it mean?
FINISHES
Many Warrior Products brand items are marked with a fitment titled “Universal”. Universal fitment products are
designed with no specific fitment in mind meaning that the do not fit anything. These parts are of a custom nature,
designed to be sold to the customer willing to “make it fit”.
4 5