Warrior 2245 High Clearance Off-Road Exhaust Kits (2007 – 2013 Jeep JK Wrangler) User Manual
Page 2
Protecting Your Adventure Lifestyle
========================================================================================
QUALITY • INTEGRITY • INNOVATION • SERVICE
Warrior, Inc.
16850 SW Upper Boones Ferry Rd
Ste. A
Durham, OR 97224
Phone: (888) 220-6861
Fax: (503) 692-0364
[email protected]
www.warriorproducts.com
TAILPIPE INSTALL
10. Slide your tailpipe onto the factory piping just above the rear axle, and attach the hanger hook on the tailpipe to the
rubber factory hanger.
11. You should have a small amount of adjustment ability to move the tailpipe into place as you’d like.
12. Once happy with the tailpipe’s location, install and tighten your exhaust clamp.
FINAL INSTALL
13. While exhaust clamps were provided to install this product, we have found issues with loosening clamps. We have
found that when using clamps along with the stainless factory pipe and the stainless muffler, the clamps cannot
squeeze the piping well, and they have a tendency to work themselves loose over time. Warrior Products
recommends that once installed, tack welds should be placed at each joint to hold the assembly together more
reliably.
This completes the installation of your new Warrior Products Off-Road Exhaust Kit. If you want to see what else Warrior
has to offer, please visit us online at
www.warriorproducts.com
. If you need further assistance installing your product, please
contact us by email at
or call us at (888) 220-6861.
THANK YOU FOR PURCHASING WARRIOR PRODUCTS