Vutec ARTSCREEN R-SERIES - Safety Instructions - Manual

ART-R SERIES INSTL_RevG - 1 -
VUTEC CORPORATION
Coral Springs, FL 33065
TEL: (954) 545 9000 - FAX: (954) 545 9011
E-MAIL:
[email protected]
Important Safety Instructions (save this instructions)
! WARNING: When using Art Screen R series, basic precautions should always be followed, including:
• Read the entire users manuals before attempting to use Art Screen R series.
• Keep everything and everyone away from Art Screen while in motion. Do not contact moving parts.
• The user must observe the Art Screen R series while TV Plasma is in motion at all times until it is stopped by pressing on one of the
directional arrows on the remote control.
• Follow the installation instructions provided to correctly install Art Screen R series. To prevent injury, Art Screen R series must be
snugly attached to the wall in accordance with the installation instructions.
• Art Screen R series restricts movement based upon the TV width set on the side controls located on the right of main shell. The TV
width must be set correctly before operating Art Screen R series.
• The Art Screen R series mounting set up is intended for use only with the maximum weight of 180 pounds (81 kg). Use with
TVs heavier than 180 pounds (81 kg) may result in instability and cause injury.
• To reduce the risk of injury, close supervision is necessary when an appliance is used near children.
• Only use attachments recommended or sold by the manufacturer.
• Do not use outdoors.
• To disconnect, turn all controls to the off (“O”) position, then remove plug from outlet.
• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
• Unplug from outlet when not in use and before servicing or cleaning.
• Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or is dropped or damaged in any
manner. Return appliance to the nearest authorized service facility for examination, repair, or electrical or mechanical adjustment.
• Connect to a properly grounded outlet only. See Grounding Instructions.
Grounding Instructions
This appliance must be grounded. In the event of malfunction or breakdown, grounding provides a path of least resistance for electric
current to reduce the risk of electric shock.
A quad outlet AC box is provided with this appliance for 220VAC connection. Connect 220VAC to this box to power the TV, X-Arm
and the IR remote control.
DANGER – Improper connection of the equipment-grounding conductor can result in a risk of electric shock.
This appliance is for use on a circuit having a nominal rating more than 220 V, 10 A and is for use on a circuit having a nominal rating
of 220 V), and is factory equipped with a specific electric cord and plug. No adapter should be used with this appliance. If the appliance
must be reconnected for use on a different type of electric circuit, the reconnection should be made by qualified service personnel; and
after the reconnection, the appliance should comply with all local codes and ordinances.