VTech CTM-A242SD Manual - Manual (Page 71)

68
Intercom (for A2410 only)
Use this feature for conversations between two cordless handsets, or a cordless handset and the telephone base.
To initiate an in
tercom call:
On the cordless handset, press INTERCOM when it is not in use. It beeps and the INTERCOM key illuminates. All destination
cordless handsets (except the cordless handset on the telephone base) and the telephone base ring, and the INTERCOM/INT
keys flash.
-OR-
On the telephone base, press INT when it is not in use. It beeps and the INT key illuminates. All destination cordless handsets
(except the cordless handset on the telephone base) ring and the INTERCOM keys flash.
To initiate an intercom call during a call:
During a call on the cordless handset, press HOLD to put the current call on hold. Then press INTERCOM. It beeps and the
INTERCOM key illuminates. All destination cordless handsets (except the cordless handset on the telephone base) and the
telephone base ring, and the INTERCOM/INT keys flash.
-OR-
During a call on the telephone base, press HOLD to put the current call on hold. Then press INT. It beeps and the INT key
illuminates. All destination cordless handsets (except the cordless handset on the telephone base) ring and the
INTERCOM keys flash.
To answer an intercom call:
Lift the cordless handset from the telephone base cradle, or press INTERCOM or /SPEAKER on the cordless handset.
-OR-
Press INT or /SPEAKER on the telephone base.
To answer an incoming call during an intercom call:
Press
TALK on the cordless handset or press /SPEAKER twice on the telephone base. The intercom call ends automatically.
To end an intercom call:
Place the cordless handset in the telephone base cradle, or press OFF on the cordless handset.
-OR-
Press INT or /SPEAKER on the telephone base.
Find handset
Use this feature to find all registered cordless handsets.
To start paging:
Press
/FIND HANDSET on the telephone base when the telephone is not in use. All idle cordless handsets beep for 60 seconds.
To end paging:
Press /FIND HANDSET again on the telephone base.
-OR-
Press any key on the cordless handset to stop the paging tone.
Data port
You can connect your modem or fax machine to the telephone line through the DATA port.
•
•
•
•
•
•
•
•
•
•
Analog cordless 1-line - A2410/CTM-A2411/CTM-A2411-BATT
Telephone operation