beautypg.com

Multiple handset use – VTech DS6421-26 Manual User Manual

Page 64

background image

59

Answer a PTT call

You can respond to a PTT call whenever the speakerphone light is off, as

described below.

When your handset receives a PTT call, the handset beeps and displays

Press and hold [PTT] to talk.
When the other party is speaking, your speakerphone light is on, and your

handset displays

PTT From HANDSET X To handset: Y (X represents

the originating handset and

Y represents the destination handset; a

maximum of four handset numbers appear).
When your speakerphone light is off and the handset displays

Press and

hold [PTT] to talk, press and hold PUSH TO TALK on your handset.

When you hear a chirp, speak towards the handset.

While you are speaking, your handset displays

PTT To HANDSET X

(

X represents the handset numbers of one or more destination

handsets; a maximum of four handset numbers appear).
Your voice is broadcast to all destination handsets.

After speaking, release

PUSH TO TALK. Your handset will beep. After the beep,

if your speakerphone light is off, you can press and hold

PUSH TO TALK to

speak again or the destination handset can respond.

Change a one-to-one PTT to intercom call

You can convert a one-to-one PTT session to an intercom call.

When your handset displays

Press and hold [PTT] to talk, press

INTCOM

. Your handset displays

Switch to Intercom? Press

SELECT

to confirm.

If you have two handsets, your handset displays

Calling other handset.

The destination handset temporarily displays

Push to talk Ended and

then

Other handset is calling.

If you have three or more handsets, your handset displays

Calling

HANDSET Y (Y represents the destination handset). The destination

handset temporarily displays

Push to talk Ended and then Handset X

is calling (X represents the originating handset).

On the destination handset, press

/HOME/

FLASH

or

to answer the

intercom call. Both handsets now display

Intercom.

To end the intercom call, press

OFF/

CANCEL

or place the handset in the

telephone base or charger. Both handsets display

Intercom ended.

1.

2.

3.

1.

2.

3.

Multiple handset use