VTech DS6421-26 Manual - Manual (Page 63)

58
PTT to multiple handsets
When there are multiple handsets registered to the telephone system, PTT
supports one-to-group calls. PTT supports a maximum of one-to-four calls
when one to five handsets are registered, and a maximum of one-to-three
calls when six or more handsets are registered. The first four registered
handsets will be able to use this feature. Other handsets can only use PTT
for one-to-one calls.
To begin a PTT call to multiple handsets:
Press and hold PUSH TO TALK when the handset is not in use.
If you have three or more handsets, press PUSH TO TALK when the
handset is not in use. Press and #, or press or to highlight
All handsets then press SELECT or PUSH TO TALK.
Your handset displays Connecting to all handsets... for a few seconds.
When the connection is made, both your and the destination handsets
display Press and hold [PTT] to talk and beep once.
Press and hold PUSH TO TALK on your handset. A chirp indicates your
microphone is on. Speak towards the handset. Your voice is broadcast to
the destination handset.
While you are speaking, the handset displays PTT To handset X (X
represents the destination handset).
Release
PUSH TO TALK after speaking. All eligible handsets beep once
again. After the handsets beep, you can press and hold PUSH TO TALK
to continue speaking or the destination handsets can respond (see
Answer a PTT call on page 59).
Press
OFF/
CANCEL
or END to end the PTT call. The handset displays
Push to talk Ended for a few seconds.
- OR -
Place the handset in the telephone base or charger to end the PTT call.
1.
•
•
2.
3.
4.
After PUSH TO TALK is released, the PTT call remains open for a short time.
If no one presses PUSH TO TALK within 10 seconds, the PTT call
ends automatically.
Multiple handset use