VTech DS6421-26 Manual - Manual (Page 54)

49
Equalizer
The equalizer feature on the handset enables you to change the quality of the
handset audio to best suit your hearing. While on a call, an intercom, a PTT
session, or listening to a message or announcement, press to select
the equalizer setting Treble 1, Treble 2, Bass or Natural (the default setting)
for the handset. You hear an in-ear beep while adjusting. If you turn off the
key tone, the in-ear beep will not be heard. The current setting is shown on
the handset for two seconds.
Transfer a call
While on an outside call, you can transfer the call from one handset to another.
Press OPTION , then press SELECT to highlight Transfer.
If you have two handsets, your handset displays Transferring call
to HANDSET X. The destination handset rings and displays Home
Transfer from other handset.
If you have three or more handsets, your handset displays
TRANSFER
TO: and a list of registered handsets. Press or to highlight a
destination handset and then press SELECT . Your handset displays
Transferring call to HANDSET X, or Transferring call to all...
when you choose All handsets. The destination handset rings and
displays Home Transfer from HANDSET X or Home Transfer from
HANDSET X to all.
Your handset displays Call transferred when the other handset picks up
the call. You hear a confirmation tone.
1.
•
•
2.
The equalizer feature does not apply to the speakerphone on the telephone
base or the connected Bluetooth headset.
If you switch the call between the handset and the speakerphone by
pressing , the audio setting remains unchanged.
The current equalizer setting remains unchanged until a new setting
is selected.
•
•
•
Telephone operation
If the destination handset does not answer within 30 seconds, the originating
handset displays No response to transfer and rings. If the originating handset
does not answer the call on hold within 30 seconds, the call will end automatically.