VTech SN6127_-2 Manual - Manual (Page 28)

22
Telephone settings
Set date and time
The answering system announces the date and time of each message
prior to playing it. Before using the answering system or reminder, set the
date and time as follows. If you subscribe to caller ID service, the day,
month and time are set automatically with each incoming call. Make sure
the settings are correct so that the reminder feature works properly.
Press MENU when the handset is not in use.
Press or to scroll to Set date/time, then
press SELECT.
Press or to select the month then press
SELECT, or use the dialing keys to enter a two-digit
number ( 01-12).
Press or to select the date then press SELECT,
or use the dialing keys to enter a two-digit number
( 01-31).
Press or to select the year then press SELECT,
or use the dialing keys to enter a two-digit number
( 00-99) then press SELECT.
Press or to select the hour then press SELECT,
or use the dialing keys to enter a two-digit number
( 01-12).
Press or to select the minute then press SELECT, or use the
dialing keys to enter a two-digit number ( 00-59).
Press or to select AM or PM.
Press SELECT to save. You hear a confirmation tone.
If the date and time are not set when a message is recorded, the system
announces, “Time and date not set,” before each message plays.
The telephone plays two beeps if you enter an invalid number.
•
•
1.
2.
3.
4.
5.
6.
7.
8.
9.
>Set date/time
Annc Caller ID
SET DATE
MM/DD/YY
SET TIME
HH:MM - -