QNAP Security VioStor NVR (Version: 3.3.2) - Manual (Page 73)

73
Camera Status
The camera status is indicated by the icons shown below:
Icon Camera Status
Scheduled or continuous recording is in process
This IP camera supports audio function
This IP camera supports PT function
Manual recording is enabled
The recording triggered by advanced event management (‘Camera Settings’ >
‘Alarm Settings’ > ‘Advanced Mode’) is in process
The alarm input 1 of the IP camera is triggered and recording is in process
The alarm input 2 of the IP camera is triggered and recording is in process
The alarm input 3 of the IP camera is triggered and recording is in process
Motion detection recording is in process
Digital zoom is enabled
Connection Message
When the NVR fails to display the video of an IP camera, a message will be shown in the
channel window to indicate the status.
Message Description
Connecting If the IP camera is located on a remote network or the Internet, it may
take some time to establish the connection to the camera.
Disconnected The NVR cannot connect to the IP camera. Please check the network
connection of your computer and the availability of the IP camera. If
the IP camera is located on the Internet, make sure you have opened
the port on your router or gateway.
No Permission You do not have the right to view the monitoring channel. Please login
as a user with the access right or contact the system administrator.
Server Error Please check the camera settings or update the firmware of the IP
camera (if any). Contact the technical support if the error persists.