QNAP Security VioStor NVR (Version: 3.3.2) - Manual (Page 202)

202
Chapter 8. LCD Panel
* This section is applicable to the NVR models with an LCD panel only.
The NVR provides a handy LCD panel for you to perform the disk configuration and view the
system information.
When the NVR has started up, you will be able to view the server name and the IP address:
N V R 5 F 4 D E 3
1 6 9 . 2 5 4 . 1 0 0 . 1 0 0
For the first time installation, the LCD panel shows the number of the hard disk drives
detected and the IP address. You may select to configure the hard drives.
Number of hard
drives detected
Default disk
configuration
Available disk configuration options*
1 Single Single
2 RAID 1 Single -> JBOD ->RAID 0 -> RAID 1
3 RAID 5 Single -> JBOD -> RAID 0 -> RAID 5
4 or above RAID 5
Single ->JBOD -> RAID 0 -> RAID 5
-> RAID 6
*Press the ‘Select’ button to choose the option, and press the ‘Enter’ button to confirm.