Chapter 4. use the nvr by web-based interface, 1 connect to the nvr, Chapter 4 – QNAP Security VioStor NVR (Version: 3.3.2) User Manual
Page 61: Use the nvr by web-based interface, Onnect to the
61
Chapter 4.
Use the NVR by Web-based Interface
You are recommended to use Microsoft Internet Explorer to monitor the IP cameras and
manage the functions of the NVR.
Important Notice:
Before using the NVR, make sure you have installed the hard disks in the server correctly
and finished the disk formatting and configuration. Otherwise, the server will not function
properly.
4.1
Connect to the NVR
Follow the steps below to connect to the monitoring page of the NVR.
1.
Run Finder. Double click the name of the NVR. You can also type the IP address of
the server in the IE browser to connect to the monitoring page.
Double click to
login the server