Chapter 7. system maintenance, Chapter 7, System maintenance – QNAP Security VioStor NVR (Version: 3.3.2) User Manual
Page 200: Eset the, Dministrator, Assword and, Etwork, Ettings
200
Chapter 7.
System Maintenance
This section provides a general overview of the system maintenance.
7.1
Reset the Administrator Password and Network Settings
To reset the administrator password and the network settings, press the reset button of the
server for five seconds. A beep sound will be heard.
After resetting the system, you can login the server with the default user name and
password:
Default user name:
admin
*
Password:
admin
*If you are using the VS-201/VS-101/NVR-104, the default login name is ‘administrator’
and the password is ‘admin’.
Note:
To reset the system by the reset button, the option ‘Enable configuration reset
switch’ in the ‘Hardware Settings’ must be activated.