QNAP Security VioStor NVR (Version: 3.3.2) - Manual (Page 33)

33
2.6 System Configuration
Install Finder
1.
Run the product CD, the following menu is shown. Click ‘Install Finder’.
2.
Follow the instructions to install Finder. Upon successful installation, run Finder. If
Finder is blocked by your firewall, unblock it.
3.
Finder detects the NVR servers on the local network. If the server has not been
initialised, you will be prompted to perform quick setup. Click ‘Yes’ to continue.
Note: If the NVR is not found, click ‘Refresh’ to try again.