QNAP Security VioStor NVR (Version: 3.3.2) User Manual
Page 192
192
10.
The NVR displays the latest 10 remote replication records.
In the above example:
1.
When the status is shown as ‘Failed (Remote access error)’: You may check if the
remote storage device is running or the network settings are correct.
2.
When the status is shown as ‘Failed (An internal error occurred)’: You may view the
hard drive status of the VioStor or view the Event Logs.
Note:
The time required by the VioStor to replicate the data to the remote storage device
varies depending on the network environment. If the remote replication takes too long,
some recording files may be overwritten by the NVR. To avoid this, you are recommended
to refer to the status messages to analyse the time required for the remote replication and
adjust the replication schedule accordingly.