Siemens TK69001 - Manual (Page 50)

50
Fault Remedial action Cause
Display
ERROR 1
Appliance too cold. Wait until the appliance has
warmed up to room
temperature.
Display
ERROR 5
Technical fault. Switch off the appliance for
at least 10 seconds with
the mains switch 1
or
ERROR 8
the mains switch 1.
If faults cannot be eliminated, always call the Hotline!
d The appliance has to be completely emptied
beforehand in order to avoid damage through the
effects of freezing, transport and storage.
i The appliance has to be operational with the watertank
filled up.
q Place a large, narrow receptacle under the froth
nozzle 13.
q Press the = button 2b.
q Remove the water tank 22.
q Wait until add water appears in the display.
q Switch off the appliance.
The guarantee conditions for this appliance are as defined
byĂour representative in the country in which it is sold. Details
regarding these conditions can be obtained from the dealer
from whom the appliance was purchased. The bill of sale or
receipt must be produced when making any claim under the
terms of this guarantee.
Subject to changes.
Protection against
freezing
Guarantee