Siemens TK69001 - Manual (Page 42)

42
This function is used to specify after how many hours
following the last brew the appliance automatically switches
to standby mode.
q Hold down button
% on display 3 for at least 3 seconds.
q Select OFF IN with < or >.
q Press button
% , hours display flashes.
q Change the setting with < or >.
q Press button
% to save the setting.
q Press the 6 button. Back to standby.
i The switchĆoff time is retained even if there is a power
failure or the mains switch 1 is actuated.
The number of brewed espressos, coffees and preground
coffees is displayed here. The number of brews are counted
automatically.
q Hold down button
% on display 3 for at least 3 seconds.
q Select NO. BREWS with < or >.
q Press the 6 button. Back to standby.
i This number cannot be changed!
Possible from Standby" mode only
q Simultaneously hold down < and > for at least
3 seconds - all your saved settings are deleted.
Energy saving mode
OFF IN
4 HOURS
ДДДДДДДДД
ДДДДДДДДД
ДДДДДДДДД
OFF IN
2 hours
Displaying number of
brews
NO. BREWS
- - - 86
RESET function