Siemens TK69001 - Manual (Page 39)

39
To change the display to the desired language:
q Hold down button % on display 3 for at least 3 seconds.
q Press button % until the display flashes.
q Selected the desired language with < or >.
q Press button
% to save the setting.
q Press the 6 button. Back to standby.
i The following languages are available:
ДДДДДДДДД
ДДДДДДДДД
ДДДДДДДДД
LANGUAGE
ENGLISH
ДДДДДДДД
ДДДДДДДД
ДДДДДДДД
LANGUE
FRANCAIS
ДДДДДДДДД
ДДДДДДДДД
ДДДДДДДДД
LINGUA
ITALIANO
ДДДДДДДД
ДДДДДДДД
ДДДДДДДД
IDIOMA
ESPANOL
ДДДДДДДДД
ДДДДДДДДД
ДДДДДДДДД
TAAL
NEDERL.
ДДДДДДДД
ДДДДДДДД
ДДДДДДДД
SPRAK
SVENSKA
ДДДДДДДДД
ДДДДДДДДД
ДДДДДДДДД
JASYK
RUSSKIY
q Determine water hardness with the supplied test strips,
e. g.:
= hardness 2
q Hold down button % on display 3 for at least 3 seconds.
q Select HARDNESS WATER with < or >.
q Press button
% until the number in the display flashes.
q Select the ascertained hardness with < or >.
q Press button
% to save the setting.
q Press the 6 button. Back to standby.
Note: It is important for the descaling programme that
the water hardness is set correctly.
If external water softeners are used in the domestic water
system or if filtered water is used, select HARDNESS
WATER 1.
Language
LANGUAGE
ENGLISH
Water hardness
ДДДДДДДДД
ДДДДДДДДД
ДДДДДДДДД
HARDNESS
WATER 1
ДДДДДДДДД
ДДДДДДДДД
ДДДДДДДДД
HARDNESS
WATER 2
ДДДДДДДДД
ДДДДДДДДД
ДДДДДДДДД
HARDNESS
WATER 3
HARDNESS
WATER 4