Siemens TK69001 - Manual (Page 32)

32
Display 3
Display 3 indicates the settings, the processes which are
running and any messages issued by the appliance.
The appliance has been programmed at the factory with
standard settings for optimum operation. These settings can
be changed - see chapter Changing settings/
Programming".
Button d 4
Button d 4 switches on the appliance or switches it to stand
by" mode.
When button
d 4 is pressed, the appliance heats up and is
then rinsed. The illuminated ring on button d 4 flashes during
this process.
The appliance is not rinsed if:
- the appliance was still warm when switched on or
- coffee was not discharged before the appliance was
switched to stand by" mode or
- steam is drawn before switching off.
Heating and rinsing processes are displayed.
While coffee is being brewed, button d 4 is assigned
a StopĆfunction. If button d 4 is pressed, the process is
terminated.
i 4 hours after the last coffee was brewed, a rinsing
process is automatically actuated and the appliance
switches to standby mode. These settings can be
changed ć see Setting/Programming" chapter.
on" button2 5
Espresso or coffee can be brewed by pressing the cafe
on" button 2 5. The green illuminated ring flashes while
espresso or coffee is being brewed.
If the on" button 2 5 is pressed again, the coffee
brewing process is terminated.
UNIT IS
HEATING
UNIT IS
RINSING