Siemens TK69001 - Manual (Page 37)

37
d Risk of scalding! Risk of burns!
Pressing = may cause it to spurt slightly.
Escaping steam is very hot.
Do not touch the froth nozzle 13 or direct it at people.
q Set the rotary knob 13a to the middle.
q Immerse the froth nozzle 13 deep into the fluid
to be warmed.
q Press the = 2b button.
The appliance now heats up for approx. 15 seconds.
Then the liquid is heated.
q End the process by repressing the= 2b button.
Note: After cooling clean froth nozzle 13 immediately. Dried
residue is difficult to remove - see chapter Cleaning/
Cleaning the froth nozzle".
d Risk of scalding! Risk of burns!
Pressing 0 may cause it to spurt slightly.
The water which is released from the machine is very hot.
Do not touch the froth nozzle 13 or direct it at people.
q Set the rotary knob 13a to the middle.
q Place an appropriate cup under the froth nozzle 13.
q Press button 2a0 and fill cup.
q End the process by repressing the 2a0 button.
Steam for heating
drinks
Preparing hot water