Siemens TK69001 - Manual (Page 36)

36
d Risk of scalding! Risk of burns!
Pressing = may cause it to spurt slightly.
Escaping steam is very hot.
Do not touch the froth nozzle 13 or direct it at people.
q Set the rotary knob 13a to
A to froth up milk or B to
warm up milk.
q Immerse hose 13f into a receptacle containing sufficient
milk.
or
only for TK69...: Attach milk container 28 with connection
hose tightly to the nozzle body.
q Place an appropriate cup under the froth nozzle 13.
q Press the = 2b button.
The unit now heats up for approx. 15 seconds,
then draws the milk in and froths and/or heats it up.
q End the process by repressing the = 2b button if
the desired amount has been made or before the milk
receptacle has been fully emptied.
Note:
To clean the froth nozzle 13, the hose 13f and the
connection hose 28b carry out the process cited above
using clear water instead of milk - see chapter Cleaning/
Cleaning the froth nozzle". Dried residue is difficult to remove
and impairs formation of the milk froth.
Tip: Preferably use cold milk with a 1.5 % fat content.
MilkĆdrinks such as cocoa for example, can be prepared
using the warming up milk setting B .
Using the enclosed (only for TK69...) sunken macchiato
plate 29 the possibility also exists to use tall glasses (up to
approx. 13 cm high), for example to prepare latte macchiato.
q Exchange drip plate 25 with macchiato plate 29.
q Place glass under the outlet nozzle and draw milk froth
according to the instructions.
q Then place the glass under the coffee outlet 12 and draw
the desired amount of coffee.
Froth or warm up milk/
Latte macchiato
Preparing latte macchiato
(only for TK69...)