Ohaus RANGER 3000 COMPACT SCALES Manual - Manual (Page 35)

Ranger™ 3000
Series EN-33
7.4 Printouts
The following sample print outs are generated by the Print button, “P” Command or alternate
print command. The content of the printout is defined in the Print Content menu item. A
maximum of 24 characters can be printed on each line.
Weigh Mode Printout
Description Comment
11.11 kg NET Result line If Printx  Content  Result is ON
12.34 kg G Gross value line If Printx  Content  Gross is ON and a tare value is entered
11.11 kg NET Net value line If Printx  Content  Net is ON and a tare value is entered
1.23 kg T Tare value line If Printx  Content  Tare is ON and a tare value is entered
MODE: WEIGH Mode line If Printx  Content  Application Mode is ON
Information line If Printx  Content  Into is ON
Weigh Mode with Accumulation Printout
Description Comment
11.11 kg NET Result line If Printx  Content  Result is ON
12.34 kg G Gross value line If Printx  Content  Gross is ON and a tare value is entered
11.11 kg NET Net value line If Printx  Content  Net is ON and a tare value is entered
1.23 kg T Tare value line If Printx  Content  Tare is ON and a tare value is entered
N:4 Accumulation line If Printx  Content  Accu is All
TOTAL: 50.35 kg Accumulation line If Printx  Content  Accu is All
MIN: 11.11 kg Accumulation line If Printx  Content  Accu is All
MAX: 14.85 kg Accumulation line If Printx  Content  Accu is All
Percent Mode Printout
Description Comment
100 % NET Result line If Printx  Content  Result is ON
12.34 kg G Gross value line If Printx  Content  Gross is ON and a tare value is entered
11.11 kg NET Net value line If Printx  Content  Net is ON and a tare value is entered
1.23 kg T Tare value line If Printx  Content  Tare is ON and a tare value is entered
MODE: PERCENT Mode line If Printx  Content  Application Mode is ON
REF WGT 0.012 kg Information line If Printx  Content  Info is ON
Count Mode Printout
Description Comment
926 PCS Result line If Printx  Content  Result is ON
12.34 kg G Gross value line If Printx  Content  Gross is ON and a tare value is entered
11.11 kg NET Net value line If Printx  Content  Net is ON and a tare value is entered
1.23 kg T Tare value line If Printx  Content  Tare is ON and a tare value is entered
MODE: COUNT Mode line If Printx  Content  Application Mode is ON
APW: 0.012 kg Information line If Printx  Content  Info is ON
Check (Weigh) Mode Printout
Description Comment
11.11 kg NET OVER Result line If Printx  Content  Result is ON, UNDER/ACCEPT/OVER
12.34 kg G Gross value line If Printx  Content  Gross is ON and a tare value is entered
11.11 kg NET Net value line If Printx  Content  Net is ON and a tare value is entered
1.23 kg T Tare value line If Printx  Content  Tare is ON and a tare value is entered
MODE: CHECKWEIGH Mode line If Printx  Content  Application Mode is ON
UNDER TARGET 1.00 kg Information line If Printx  Content  Info is ON
OVER TARGET 2.00 kg Information line If Printx  Content  Info is ON
Dynamic Mode Printout
Description Comment
12.34 KG NET Result line If Printx  Content  Result is ON
12.34 kg G Gross value line If Printx  Content  Gross is ON and a tare value is entered
11.11 kg NET Net value line If Printx  Content  Net is ON and a tare value is entered
1.23 kg T Tare value line If Printx  Content  Tare is ON and a tare value is entered
MODE: DYNAMIC Mode line If Printx  Content  Application Mode is ON
LEVEL 10 Information line If Printx  Content  Info is ON