Series – Ohaus RANGER 3000 COMPACT SCALES Manual User Manual
Page 18
EN-16
Ranger™ 3000
Series
Reset
[reset]
Reset the Read menu to factory defaults.
NO
= not reset
YES
= reset
Stable Range
[Stable]
Set the amount the reading can vary while the stability symbol remains on.
0.5d
= 0.5 scale division
1d
= 1 scale division
2d
= 2 scale division
5d
= 5 scale division
Filter
[FILtEr]
Set the amount of signal filtering.
LOW
= less stability, faster stabilization time
MED
= normal stability, stabilization time
HI
= greater stability, slower stabilization time
AZT
[AZt]
Set the automatic zero tracking functionality.
OFF
= disabled
0.5d
= the display will maintain zero until a change of 0.5 divisions per second has
been exceeded.
1d
= the display will maintain zero until a change of 1 divisions per second has been
exceeded.
3d
= the display will maintain zero until a change of 3 divisions per second has been
exceeded.
Light
[LIGHt]
LCD models:
Sets backlight functionality.
OFF
= always off
ON
= always on
AUTO = turns on when a button is pressed or the displayed weight changes.
Auto off
[A.OFF]
Set the automatic shut off functionality.
OFF
= disabled
1
= powers off after 1 minute of no activity
5
= powers off after 5 minute of no activity
10
= powers off after 10 minute of no activity
End Readout
[End]
Advance to the next menu or return to the top of the current menu.