Ohaus RANGER 3000 COMPACT SCALES Manual - Manual (Page 19)

Ranger™ 3000
Series EN-17
4.5 Mode Menu
This menu activates modes so they will be available for use with the Mode button. Default
settings are in bold.
Reset
[reset]
Reset the Mode menu to factory defaults.
NO = not reset
YES = reset
Weigh
[wWEIGH]
Set the status.
OFF = disabled
ON = enabled
Percent
[PerCNt]
Set the status.
OFF = disabled
ON = enabled
Count
[COUNt]
Set the status.
OFF = disabled
ON = enabled
Check
[CHECk]
Set the sub-mode
OFF = disabled
WEIGH = weight mode
PERCNT = percent mode
COUTN = count mode
Dynamic
[DYNAmM]
Set the status.
OFF = disabled
MAN = averaging and resetting are initiated manually
SEMI = averaging is automatically initiated
resetting is manually initiated
AUTO = averaging and resetting are automatically initiated
End Mode
[End]
Advance to the next menu or return to the top of the current menu.
4.6 Unit Menu
This menu activates units so they will be accessible with the Units button. The units in the menu
must be turned “on” to be active.
Reset: no, yes
Weigh: off, on
Percent: off, on
Count: off, on
Check: off, weigh, percnt, count
Dynamic: off, man, semi, auto
End Mode: Exit menu