Ohaus RANGER 3000 COMPACT SCALES Manual - Manual (Page 26)

EN-24
Ranger™ 3000
Series
4.11 Additional Features
The Weigh Below Hook is provided with the scale. To use this feature, remove power from the
scale and remove the protective cover for the weigh below opening. Install the hook into the
access hole at the bottom of the scale as shown. Do not over tighten, tighten finger tight. Mount
the scale onto an appropriate assembly that allows free working space below the hook. See
figure 4-1.
Note:
Never allow the scale to rest directly on the hook.
Figure 4-1. Setup for the Weigh Below Hook
Weigh Below Hook
Access