Ohaus RANGER COMPACT COUNTING SCALES Manual en - Manual (Page 37)

5.2 SICS interface commands
The Ranger RC compact scales support the command set MT-SICS (METTLER
TOLEDO
Standard Interface Command Set). With SICS commands, it is possible to
configure, query and operate the scales from a PC. SICS commands are divided up
into various levels.
5.2.1 Available SICS commands
Command Meaning
LEVEL 0 @ Reset the scale
I0 Inquiry of all available SICS commands
I1 Inquiry of SICS level and SICS versions
I2 Inquiry of scale data
I3 Inquiry of scale software version
I4 Inquiry of serial number
S Send stable weight value
SI Send weight value immediately
SIR Send weight value repeatedly
Z Zero the scale
ZI Zero immediately
LEVEL 1 D Write text into display
DW Weight display
K Keyboard check
SR Send and repeat stable weight value
T Tare
TA Tare value
TAC Clear tare
TI Tare immediately
LEVEL 2 C2 Calibrate with the external calibration weight
C3 Calibrate with the internal calibration weight
I10 Inquire or set scale ID
I11 Inquiry of scale type
P100 Print out on the printer
Interface description Ranger RC
37
To use the MT-SICS commands, first send the OHAUS command PSI. To return to the
OHAUS command set, send the OHAUS command POH.