Ohaus RANGER COMPACT COUNTING SCALES Manual en - Manual (Page 33)

Settings in the menu Ranger RC
33
4.6.6 DEF.PRN – configuring templates
OUT 1 ... 4 • Configuring outputs 1 ... 4
OFF • Output not assigned
StAbLE • Stable weight value
bEL.MIN • Minimum weight not reached
AbV.MIN • Minimum weight reached or exceeded
UNdErLd • Insufficient load
OVErLd • Overload
StAr • Changed/calculated value
ANALOG Configuration of the analog second scale interface
Mode Operating mode of the second scale
rEF • Second scale can only be used to determine the average piece weight
bULK • Second scale can only be used as bulk scale
AuXILIA • No difference between reference and bulk scale, all functions available on the
scale selected
BYPASS • Second scale interface not assigned
tEMPLt1/tEMPLt2
Selecting Template 1 or Template 2
LINE 1 ... 20 Select line
NOt.USEd • Line not used
HEAdEr • Line as header. The contents of the header must be defined via an interface com-
mand, see Section 5.1.
SCALE.NO • Scale number
GROSS • Gross weight
tArE • Tare weight
nEt • Net weight
APW • Average piece weight
rEF Ct • Reference quantity
PCS • Pieces
StARLN • Line with ***
CrLF • Line feed (blank line)
F FEEd • Page feed