Ohaus TROOPER COMPACT COUNTING SCALES Manual multi - Manual (Page 28)

24
Trooper Count Scale
Procedure
The following example is for a 6kg scale.
With the Scale ON, press and hold the SAMPLE Menu
button until CAL MENU is displayed.
Press the Enter button twice, NO should be blinking.
Press the M- button to change to YES, then press the
Enter button.
kg g lb oz Net B/G %Ac T PT APW MR M < > PCS
WEIGHT DATA COUNT
BLINKING
kg g lb oz Net B/G %Ac T PT APW MR M < > PCS
WEIGHT DATA COUNT
BLINKING
kg g lb oz Net B/G %Ac T PT APW MR M < > PCS
WEIGHT DATA COUNT
BLINKING
M < > PCS
COUNT
M < > PCS
COUNT
kg g lb oz Net B/G %Ac T PT APW MR M < > PCS
WEIGHT DATA COUNT
M < > PCS
COUNT
M < > PCS
COUNT
Place the indicated calibration mass on the pan, then press the Enter button. The sample illustration indicates a 6kg
Scale using a 2kg mass.
Clear the pan, then press the Enter button.
(Scale is determining zero value)
5.1 Span Calibration
kg g lb oz Net B/G %Ac T PT APW MR M < > PCS
WEIGHT DATA COUNT
kg g lb oz Net B/G %Ac T PT APW MR M < > PCS
WEIGHT DATA COUNT
If the calibration was successful, SPAN TEST DONE is
displayed momentarily followed by CLEAR PAN THEN
PRESS ENTER.
Clear the pan, then press the Enter button.
kg g lb oz Net B/G %Ac T PT APW MR M < > PCS
WEIGHT DATA COUNT
(Scale is determining span value)
kg g lb oz Net B/G %Ac T PT APW MR M < > PCS
WEIGHT DATA COUNT
kg g lb oz Net B/G %Ac T PT APW MR M < > PCS
WEIGHT DATA COUNT
The scale will restart and return to weighing. If calibration was unsuccessful, refer to the troubleshooting section.
M < > PCS
COUNT
M < > PCS
COUNT