Ohaus TROOPER COMPACT COUNTING SCALES Manual multi - Manual (Page 17)

13
Trooper Count Scale
Press M+ to advance to count. Count is the accumu-
lated piece count in memory. Press Enter button to
edit count value.
Using the numeric keypad, enter the desired count.
The sample illustrates 250 pieces. Press the Enter
button to accept.
To exit library editing, momentarily press the Library
kg g lb oz Net B/G %Ac T PT APW MR M < > PCS
WEIGHT DATA COUNT
BLINKING
kg g lb oz Net B/G %Ac T PT APW MR M < > PCS
WEIGHT DATA COUNT
BLINKING
3.4.2 Entering Data Directly into Library (Cont.)
BLINKING
kg g lb oz Net B/G %Ac T PT APW MR M < > PCS
WEIGHT DATA COUNT
BLINKING
kg g lb oz Net B/G %Ac T PT APW MR M < > PCS
WEIGHT DATA COUNT
To save the settings, use a long press on the
Library Save button. The library location (ID 22)
and UPDATE YES is displayed.
Press Enter button to accept save location. Press
Enter button again to save changes.
3.4.3 Saving Library Data
Temporary changes to a library location need to be
permanently saved or the changes will be lost when
the scale is turned off. The scale will recommend
saving temporary changes when the library location
is changed or when the scale is turned off.
kg g lb oz Net B/G %Ac T PT APW MR M < > PCS
WEIGHT DATA COUNT
The UPDATE DONE display confirms a successful save.
3.4.4 Saving Library Data in Another Location
You have the option of copying all data from one li-
brary location into another library location. In the
following example, we will save data from library lo-
cation 22 to 52. Library 22 is shown.
BLINKING
kg g lb oz Net B/G %Ac T PT APW MR M < > PCS
WEIGHT DATA COUNT
BLINKING
kg g lb oz Net B/G %Ac T PT APW MR M < > PCS
WEIGHT DATA COUNT
Make a long press on LIBRARY Save button until
display indicates UPDATE.
Enter the desired new location directory using the nu-
meric keypad or by pressing the M+ button to ad-
vance to the next open location. The sample is loca-
tion 52. Press the Enter button.