Ohaus TROOPER COMPACT COUNTING SCALES Manual multi - Manual (Page 10)

6
Trooper Count Scale
No. Designation Function
4 Numeric Keypad Enter specific values for tare, APW and other data entries.
5 Data button Selects between data modes in the Data display.
In edit mode, serves as a “Go Back” or backspace key.
6 Clear button During editing, clears the blinking entry.
7 M+ button Adds the displayed quantity into the accumulating memory.
During editing, selects the next higher option or number.
8 M- button Subtracts the keyboard entry from the accumulating memory. In sampling mode,
enters negative sampling.
During editing, selects the next lower option or number.
9 Enter button Enters edit function of current mode. If current mode does not support edit func-
tions, an error beep will occur.
In edit mode, accepts entry.
10 TARE button Tares the weight on the pan or accepts the keypad tare entries.
11 LIBRARY Save button Short press displays Library ID (blinking) and the part number. Repeat press
returns to weigh/count mode.
Long press (3 seconds) saves library changes.
12 SAMPLE Menu button Short press enters the sampling mode.
Long press (3 seconds) enters scale setup menu. In menu mode, a short press
will return to weigh mode.
13 PRINT Units button Short press sends data to RS232 port.
Long press (3 seconds) steps through active weigh units. Release on desired
unit.
14 ON/ZERO Off button Short press turns the scale on or zeros the display.
Long press (3 seconds) turns the scale off.
3.1 Overview of Controls and Display Functions (Cont.)