Ohaus DISCOVERY SEMI-MICRO AND ANALYTICAL BALANCES Manual - Manual (Page 3)

Ohaus Corporation, 19A Chapin Road, P.O. Box 2033 Pine Brook, New Jersey, 07058, USA
Declaration of Conformity We, Ohaus Corporation, declare under our sole responsibility that the balance models listed below marked with “CE”
- are in conformity with the directives and standards mentioned.
EC Marking: EC Directive Applicable Standards
73/23/EEC
Low Voltage EN61010-1: 2001
89/336/EEC
Electromagnetic compatibility
For non-automatic weighing instruments used in an Article 1, 2.(a) application, additional metrological marking according to Annex IV of
Council directive 90/384/EEC must be attached to the instrument
EN45501:1992 *
Ted Xia
President
Ohaus Corporation
Pine Brook, NJ USA
Urs Müller
General Manager
Ohaus Europe
Greifensee, Switzerland
* Applies only to certified non-automatic weighing instruments.
Date: April 1, 2006
Instrument Type: Discovery Series
EN61326:1997+A1:A2:01+A3:03 (class B)
EN61326:1997+A1:A2:01+A3:03 (minimal requirements)
90/384/EEC
Non-Automatic
Weighing Instruments