Ohaus FD Series STAINLESS STEEL COMPACT SCALES Manual multi - Manual (Page 28)

FD Series EN-22
4.4 Service Information
If the Troubleshooting section does not resolve or describe your problem, contact your authorized
Ohaus Service Agent. For Service assistance in the United States and Canada, please call Ohaus
Corporation toll free at (800) 526-0659 from 8 AM to 5 PM Eastern Time. An Ohaus Product Service
Specialist will be available to help you.
4.5 Accessories
Description Part Number
Foot Switch 71169633
TABLE 4-2. ERROR CODES.
Error Code Cause Remedy
Err 2 (Underload) Missing pan. Install the pan and press the zero
button.
Err 9 (Checksum error)
Err14 (Zero error)
Err 21 (Checksum error)
CAL E (Calibration error)
Configuration data
checksum error. Service required.
Zero limit exceeded
during power up. Remove load from pan.
Calibration data
checksum error. Check menu settings and recalibrate.
If error persists, service is required.
Wrong calibration weight
values used. Calibrate using correct calibration
weights.
Err 1 (Overload) Load exceeds capacity. Reduce load.