Ohaus FD Series STAINLESS STEEL COMPACT SCALES Manual multi - Manual (Page 22)

FD Series EN-16
3.7.3 Readout sub-menu
Press Yes Yes Yes Yes Yes to enter the Readout sub-menu.
Reset
Press Yes to enter the Reset menu.
• No - does not change the Readout sub-menu settings.
• Yes - reset the Readout sub-menu to the factory
default settings (bold and underlined text herein).
Averaging Level
Press Yes to enter the Averaging Level menu.
• Lo - less filtering (faster stabilization time).
• Hi - more filtering (longer stabilization time).
Light
Press Yes to enter the Backlight menu.
• Off - turn display backlight off.
• On - turn display backlight on.
• Auto - automatically turns the display backlight on when
the scale is active and off after 5 seconds of inactivity.
Auto Off
Press Yes to enter the Auto-off menu.
• Off - disable auto off.
• On - turn the scale off after 5 minutes of inactivity.
Auto Zero tracking
Press Yes to enter the Auto Zero Tracking menu.
• 0.5 d - 1/2 division capture range.
• 1 d - 1 division capture range.
• 3 d - 3 division capture range.
• Off - disable Auto Zero Tracking.
Auto Tare
Press Yes to enter the Automatic Tare menu.
• Off - disable Automatic Tare.
• On - enable Automatic Tare.
End
• Press Yes to leave this sub-menu and go to the next.
• Press No to return to the top menu item in this sub-menu.