4 unit sub-menu – Ohaus FD Series STAINLESS STEEL COMPACT SCALES Manual multi User Manual

Page 23

EN-17

FD Series

3.7.4

Unit sub-menu

Press Yes

Yes

Yes to enter the Unit sub-menu.

Reset
Press Yes to enter the Reset menu.
• No - does not change the Unit sub-menu settings.
• Yes - reset the Unit sub-menu to the factory default

settings (bold and underlined text herein).

Gram unit
Press Yes

Yes

Yes to enter the Gram unit menu.

• Off - disable grams.
• On - enable grams.
Kilogram unit
Press Yes

Yes

Yes to enter the Kilogram unit menu.

• Off - disable kilograms.
• On - enable kilograms
Pound unit
Press Yes

Yes

Yes to enter the Pound unit menu.

• Off - disable pounds.
• On - enable pounds.
Ounce unit
Press Yes

Yes

Yes to enter the Ounce unit menu.

• Off - disable ounces.
• dEC - enable decimal ounces.
• FrAC - enable fractional ounces.
Pound:Ounce unit
Press Yes

Yes

Yes to enter the Pound Ounce unit

menu.
• Off - disable pound ounces.
• dEC - enable decimal pound ounces.
• FrAC - enable fractional pound ounces.
P(Percent) unit*
Press Yes

Yes

Yes to enter the P unit menu.

• Off - disable p.
• On - enable p.
End
• Press Yes

Yes

Yes to leave this sub-menu and go to the next.

• Press No

No to return to the top menu item in this sub-

menu.
*Use P to measure the weight of a sample as a % of ref.
weight. When P is selected diplay will show S.rEF and
P.Press “No” to use ref. weight in memory,”Yes” to estblish
new ref.After placing reference material, press “Yes” to
establish 100% ref.Replace ref. material with new sample
to read percentage of the sample compared to ref. weight