Ohaus FD Series STAINLESS STEEL COMPACT SCALES Manual multi - Manual (Page 16)

FD Series EN-10
Automatic Tare (Refer to Section 3.7.3)
Auto-tare is a convenience feature that automatically tares the initial weight (such as an empty
container) placed on the empty pan, without having to press the TARE button. The tare value is cleared
automatically when the weight on the pan is fully removed.
Remote Tare (Foot Switch)
Taring with the optional foot switch is equivalent to pressing the Tare button.
3.3.5 Displaying Gross, Net and Tare Values
When a tare has been entered, pressing the G/N/T button successively displays the Tare (TARE
indicator turns on), the Gross, and the Net weights (NET indicator turns on). After a few seconds
the scale automatically reverts to displaying the NET weight.
3.3.6 Changing Unit of Measure
Press and hold the Units button until the desired unit is displayed. If one of the available units is not
displayed, enable it as described in Section 3.7.4.
3.4 Menu
3.4.1 Menu Structure
The FD Series menu structure consists of three levels: Main, Sub-menu, and Menu item. The Main
menu contains the Sub-menus and each Sub-menu contains several Menu items. Each Menu item
contains two or more settings.
TABLE 3-2. MENU STRUCTURE.
Main menu
Sub-menu
Menu item
P
NOTE: LFT menu item and LOCK sub menu will not appear in FDxxH models