Ohaus FD Series STAINLESS STEEL COMPACT SCALES Manual multi - Manual (Page 24)

FD Series EN-18
3.7.5 Mode sub-menu
Press Yes Yes Yes Yes Yes to enter the Mode sub-menu.
Reset
Press Yes to enter the Reset menu.
• No - does not change the Mode sub-menu settings.
• Yes - reset the Mode sub-menu to the factory
default settings (bold and underlined text herein).
Checkweigh mode
Press Yes
Yes Yes Yes Yes to enter the Checkweigh menu.
• Off - disable the Checkweighing mode.
• On - enable the Checkweighing mode.
Alert
Press Yes to enter the Checkweigh Alert menu.
• Off - disable alert beeping.
• OK - beep when the green Accept light is on.
• Lo - beep when the yellow Under light is on.
• Hi - beep when the red Over light is on.
• Lo-Hi - beep when the yellow Under or red Over light is on.
• Change - beep once when the green Accept light is on, twice
when the red Over light is on.
End
• Press Yes to leave this sub-menu and go to the next.
• Press No to return to the top menu item in this sub-
menu.