Ohaus FD Series STAINLESS STEEL COMPACT SCALES Manual multi - Manual (Page 25)

EN-19 FD Series
3.7.6
Lockout sub-menu
Press Yes Yes Yes Yes Yes to enter the Lockout sub-menu.
Reset
Press Yes to enter the Reset sub-menu.
• No - does not change the Lockout sub-menu settings.
• Yes - reset the Lockout sub-menu to the factory default
settings (bold and underlined text herein).
Lock Calibration
Press Yes
Yes Yes Yes Yes to enter the Lock Calibration sub-menu.
• Off - enable changes to the Calibration sub-menu.
• On - lock Calibration sub-menu settings.
Lock Setup
Press Yes to enter the Lock Setup sub-menu.
• Off - enable changes to the Setup sub-menu.
• On - lock Setup sub-menu settings.
Lock Readout
Press Yes
Yes Yes Yes Yes to enter the Lock Readout sub-menu.
• Off - enable changes to the Readout sub-menu.
• On - lock Readout sub-menu settings.
Lock Unit
Press Yes to enter the Lock Unit sub-menu.
• Off - enable changes to the Unit sub-menu.
• On - lock Unit sub-menu settings.
Lock Mode
Press Yes to enter the Lock Mode sub-menu.
• Off - enable changes to the Mode sub-menu.
• On - lock Mode sub-menu settings.
End
• Press Yes
Yes Yes Yes Yes to leave this sub-menu and go to the next.
• Press No No No No No to return to the top menu item in this sub-menu.