Ohaus JR Series Electronic Balances - Manual (Page 23)

23
Weighing Units
g grams : mommes
dwt pennyweight ct carats
oz t troy ounces t taels
lb lb:oz
gn oz
Unit Selection Unit Selection Unit Selection Unit Selection Unit Selection
Unit selection permits you to specify which
weighing units will be enabled for use
during operation. The adjacent table lists
the units available.
To enable or disable the various weighing
units, use the following procedure:
1. Access the SEL menu.
2. The display will show the grams unit
indicator (g) along with the current
status (ON/OFF).
3. Press to change the status.
4. Press to accept the displayed
status. When is released, the
display will show the next unit indica-
tor with the current status.
5. Set each unit ON or OFF as in step 3.
(Hong Kong)
(Singapore)
(Taiwan)
OFF OFF OFF OFF OFF
MODE MODE MODE MODE MODE
Taels Taels Taels Taels Taels
If taels are enabled, you will be required to
choose one of three different taels: Hong
Kong, Singapore, or Taiwan.
When the display shows TAEL 1, press
to change to another tael, press
to accept the displayed tael.
When the last weighing unit has been set,
the display will show SEL again and the
Setup menu will be returned.
ON ON ON ON ON
TARE TARE TARE TARE TARE
ON ON ON ON ON
TARE TARE TARE TARE TARE
OFF OFF OFF OFF OFF
MODE MODE MODE MODE MODE
ON ON ON ON ON
TARE TARE TARE TARE TARE