Ohaus JR Series Electronic Balances - Manual (Page 14)

14
Span Calibration Span Calibration Span Calibration Span Calibration Span Calibration
1. Press and hold until CAL is
displayed, then release it. Balance
will display SPAN.
2. Press .
3. When is released, C 0g will be
displayed indicating that no weight
should be on the pan.
4. Press . The display will show
-C- followed by the value of the weight
which must be placed on the pan.
NOTE: NOTE: NOTE: NOTE: NOTE: Do not disturb the balance when
-C- is displayed. Disturbances will
result in improper calibration.
5. Place the required weight on the pan
and press . The display will
show -C- while the balance recali-
brates.
6. When the weight on the pan is dis-
played along with the current unit
indicator, the balance is recalibrated.
ON ON ON ON ON
TARE TARE TARE TARE TARE
ON ON ON ON ON
TARE TARE TARE TARE TARE
ON ON ON ON ON
TARE TARE TARE TARE TARE
ON ON ON ON ON
TARE TARE TARE TARE TARE
ON ON ON ON ON
TARE TARE TARE TARE TARE